M2053-N dust cover is specially designed for 2.54mm pitch IDC connectors. Made of high-quality engineering plastic, it fits perfectly with IDC termination headers and cables. It effectively blocks dust, moisture and debris from entering the contact area, protecting internal terminals from oxidation, short circuit and mechanical damage. With integrated snap-fit structure, the cover can be installed and removed easily without extra tools, ensuring firm locking after assembly. It is a necessary accessory to extend the service life and maintain stable electrical performance of IDC connector systems.

M2545R-N-K wire-to-board headers features a 2.54mm centerline pitch and a right-angle form factor, designed for reliable, cost-effective connections between discrete wires and printed circuit boards (PCBs). Available in configurations from 2 to 16 positions, the header is through-hole soldered to the PCB, providing robust mechanical stability and electrical performance for a wide range of commercial and industrial applications. All products are manufactured with UL94 V-0 flame-retardant housings and tin-plated contacts, meeting RoHS compliance standards.

M2545-N-K vertical wire-to-board header adopts standard 2.54mm centerline pitch and single-row design with through-hole mounting structure. Equipped with square tin-plated contacts and flame-retardant housing, it features polarized structure and friction lock to ensure stable mating. Available in multiple standard pin counts, this series is fully compatible with mainstream IDC cable assemblies and matching receptacles. It delivers reliable electrical and mechanical performance, widely applied in signal and low-power connection scenarios for electronic devices. All products comply with global environmental protection standards.

M2548-2xN(M)

M2548-2xN(P)

M25483-2xN

M25481 M25482 M25484

M5039-X-X-XXX-X

M5038-X-X-XXX-X

M7264-X-XXXX-2B

M7268-X-XXXX-2B

HRB M723X series are RAST 2.5 IDC connectors with advanced IDT (Insulation Displacement Technology) designed for reliable wire-to-board connections. These connectors feature 2.5mm pitch, polarization keying, and PCB locking structures to prevent mismating and ensure stable performance. Widely used in home appliances, automotive electronics, industrial controls, and smart devices, they support fast assembly without stripping or crimping, improve production efficiency, and comply with UL, cUL, VDE, RoHS, REACH, and other global standards.

HRB Model M727X RAST 2.5 Power IDC adopts professional insulation displacement connection (IDT/IDC) technology, designed for reliable wire‑to‑board and wire‑to‑wire power connections in home appliances, industrial control systems and automotive electronics. It supports 2–10 pins with 5.0mm contact pitch, rated 6A/250V AC/DC, and works stably at ‑40°C to +120°C. The connector features UL94 V‑0 flame‑retardant Nylon66 housing, tin‑plated phosphor bronze terminals, and polarization with locking structure to prevent mismating and loosening under long‑term vibration. No soldering or crimping is required, which greatly improves assembly efficiency and reduces labor cost for mass production. Compliant with RoHS, REACH, UL, VDE and other global safety certifications, HRB M727X series provides stable, safe and cost‑effective interconnection solutions for modern electrical and electronic equipment.

HRB M726X RAST 2.5 Power IDC connector adopts professional insulation displacement technology (IDT/IDC) for stable and efficient wire-to-board and wire-to-wire connection. It supports 2–10 pins with 5.0mm pitch, rated 6A/250V AC/DC, and operates reliably at -40°C to +120°C. The connector features UL94 V-0 flame-retardant housing, tin-plated phosphor bronze terminals, polarization, and locking structure to prevent mismating and loosening under vibration. No crimping or soldering is needed, which greatly improves assembly efficiency and reduces labor cost. Compliant with RoHS, REACH, UL, VDE and global safety standards, it provides a safe, stable and cost-effective interconnection solution for industrial control, home appliances, automotive electronics and power supply systems.

HRB M500X series is a standard RAST 5.0 pitch connector adopting advanced IDT (Insulation Displacement Technology) for fast and stable cable termination without stripping or crimping. It provides 2–12Pin configurations, rated current 6A–16A, voltage 250V AC/DC, operating temperature -40℃ to +120℃, housing made of UL94 V-0 nylon 66, terminals in phosphor bronze with tin/silver/gold plating options. Equipped with polarization, keying and locking structure to prevent mismating and loose connection, compliant with RoHS, REACH, UL, VDE certifications. Widely applied in home appliances, industrial control, automotive electronics, smart home and power supply equipment, ideal for automated assembly and high-reliability interconnection scenarios.