what are the production line of the waterproof connector

what are the production line of the waterproof connector?

The waterproof connector is a key device in the production line of many industries. It usually refers to the cable or pipeline used to connect two parts of the equipment or devices together in a water-resistant environment. The main purpose of using waterproof connectors is to prevent water or any other liquid from entering and damaging the electronic circuits.

What are the different kinds of waterproof connector in the market?

Packing and Delivery of waterproof connector

Testing and Quality Control of waterproof connector

What are the different kinds of waterproof connector in the market?

The number of pins will determine the amount of current that can flow through the connector. For example, a 3-pin connector can carry up to 5Amp while a 9-pin connector can carry up to 15 Amp.

Shell size is another important consideration; you'll need to make sure that the connector you select can physically fit in the space allotted. Shell sizes for these connectors range from 12mm to 48mm.

Finally, you'll need to decide on the type of plating for the contacts; there are three main options: gold plated, silver plated, or nickel plated. Gold is the most expensive option but it provides the best resistance to corrosion. Silver is a good middle ground option; it's less expensive than gold but still provides good corrosion resistance. Nickel is the least expensive option but it is also the least resistant to corrosion.

Packing and Delivery of waterproof connector

Different types of products require different types of packaging. The most common type of packaging is a cardboard box. Other types of packaging include plastic bags, bubble wrap, and styrofoam. Depending on the product, the packaging may need to be designed to protect the product from damage during shipping.

Delivery times will vary depending on the production line. In general, the production line for waterproof connectors is much faster than the production line for other types of connectors.

Testing and Quality Control of waterproof connector

Testing and quality control are essential parts of the production process for any product, but they are especially important for waterproof connectors. Because these connectors are designed to keep water out, it is critical that they are tested thoroughly before they leave the factory.

There are a number of different tests that can be performed on waterproof connectors, but some of the most important ones include:

-Waterproofing test: This test is used to ensure that the connector is completely sealed and will not allow any water to enter.

-Pull test: This test is used to check the strength of the connection between the connector and the cable.

-Contact resistance test: This test is used to check for any irregularities in the electrical connection between the connector and the cable.

-Salt spray test: This test is used to check for corrosion resistance.

Shenzhen Hongru Connector usually have in stock for normal products, around 3-5days L/T, and it takes around 10-15days to produce bulk connector which we have no stock items.