Imagine what would happen if there is no rast connector? Nowadays, the circuits must be permanently connected with continuous conductors. If not, there will be some trouble. For example, if an electronic device is to be connected to a power source, the two ends of the connecting wire must be firmly connected to the electronic device and the power source by some method (such as welding). As a result, it brings a lot of inconvenience to both production and use.
Take car batteries as an example. Assuming that the battery cable is fixed and welded to the battery, the automobile manufacturer increases the workload for installing the battery, increasing the production time and cost. When the battery is damaged and needs to be replaced, the car has to be sent to a repair station, the old one is removed, and the new one has welded again, which requires more labor costs. With the rast connector, you can save a lot of trouble, buy a new battery from the store, disconnect the connector, remove the old battery, install a new battery, and reconnect the connector. This simple example illustrates the benefits of rast connectors.
The advantages of rast connectors
The disadvantages of rast connectors
(1)The advantages of rast connectors
From the above example, we can clearly know rast connectors’ benefits. There are mainly four advantages of using it. Below shows how important the rast connector is in our life.
First, rast connectors simplify the assembly process of electronic products. It also simplifies the mass production process.
Second, with a rast connector installed in electronic equipment, the failed component could be quickly replaced if some part broken.
Third, with the advancement of technology, components can be updated when rast connectors are installed, and more new complete components can be used to replace the old ones.
Last but not least, if you employ a rast connector, it enables engineers to have greater flexibility when designing and integrating new products.
(2)The disadvantages of rast connectors
Firstly, the rast connectors have a lifespan, which means they cannot be employed forever. It can be used during its life, but if you still use it above its time, which will pose danger to us.
Secondly, the technology level of rast connector manufacturers is uneven. It is difficult to guarantee product quality, and most of them do not pay attention to appearance. The quality of mass production is not good enough. Using bad quality rast connectors will also be trouble over time.
Thirdly, we now lack a standard management mechanism, and sometimes strict management is not in accordance with the prescribed process methods, so there is some trouble with its quality.
We have 16 years of manufacturing experience of different kinds of connectors, such as rast 2.5 connectors, rast 2.5 power connectors, rast 5.0 connectors, circular connectors, etc. We can design your idea connectors. Hope this article has helped you understand more about rast connectors. If you need any rast connectors, please contact us.
English
