EnglishViews: 0 Author: Site Editor Publish Time: 2021-06-15 Origin: Site
With the development of whoever is now, people are more pursuing spiritual enjoyment. Going to the coffee shop to chat with old friends, hang out with friends, travel is the hottest industry that has developed in recent years, especially whenever During holidays, our country is even more overcrowded, and cars are a good tool for travel, cars must be inseparable from automobile connectors
Besides, as people have higher and higher requirements for safety, environmental protection, comfort, intelligence, etc. The application of automotive electronic products is increasing, which will cause the number of automotive connector applications to show an increase. Therefore, for these reasons, we should have a general understanding of automotive connectors, including their general concept, use, installation method, development trend, etc. This article will briefly explain some of the contents
The following knowledge points are listed below:
What is an automobile connector?
Steps to assemble automobile connector
Common failure modes of automotive connectors
The automotive connector is a component that electronic engineering and technical personnel often touch. The form and structure of automobile connectors are ever-changing, and they are mainly composed of four basic structural components: contacts, shells, insulators, and accessories. There are nearly a hundred types of connectors used in general automobiles, and there are about hundreds of connectors used in a single car.
The method of use is very simple and divided into three steps
1. Insert the fiber optic cable through the dust cap, use a knife to pull out the outer rubber skin 3-5 cm, keep the outer skins on both sides flush, the point of attention is to be careful during the cutting process, do not hurt your hands or cut the Inside the fiber.
2. Put the cut optical fiber cable into the clamp of the connector body, keep the internal optical fiber flush with the connector body, then close the clamp and clean the end of the line.
3. Finally, after inserting the optical fiber into the main body slot, check that the line speed of the optical fiber interface is normal, and tighten the tail cap in the middle body. The screwing process should be as light as possible to avoid errors in the process and reinstall the device.
If there is a problem with the connection of key auto parts, it will cause the fire alarm, brake or airbag to fail, leading to serious consequences. In order to evaluate the stability of the connector, the connector manufacturer has implemented elaborate test procedures. If a connector failure occurs, it can mostly be determined as one of the following three failure modes: friction corrosion, electrical failure, and connector insertion problems.
Our company was established in 2003 and has rich experience and advanced technology in the manufacture of automotive connectors. Our company group is committed to providing customers with the best products and the best value, and build the best trust with customers to meet every specific need, If you have any needs, please contact us.