Among electronic components, wire-to-wire connectors are one of the more popular products. So how much do you know about wire-to-wire connectors? The following article will focus on introducing the types of wire-to-wire connectors, allowing you to have a deeper understanding of products such as wire-to-wire connectors, and also providing a good reference for your purchase.
The article contains the following:
1)The definition of the wire to wire connector
2) Characteristics of the wire to wire connector
3)Types of wire-to-wire connector
4)Conclusion
Introduction
Wire-to-Wire Connectors are a fundamental part of JST’s Electrical Connector range. JST has an array of wire-to-wire connectors that have been developed to be suitable for many different connector applications and environments.
Characteristics
The appearance is made of stainless steel shot blasting, which has the characteristics of good air tightness and beautiful appearance. It is easy to operate and install, and it is convenient to achieve the effect of never releasing odor. It eliminates the old-fashioned above-ground, cumbersome installation, maintenance and connection of underground water traps. The wire-to-wire connector family includes rectangular, round, wire-to-wire connectors with ultra-small-D and ribbon connectors. Coaxial connectors also belong to this series, but their design features for high-frequency use will be discussed later.
Types
There are three basic types of wire-to-wire connectors, namely wire-to-wire, wire-to-board and board-to-board. These three types of connection methods are not completely different. The following two reasons can explain the overlapping status of such types. The design scheme of this kind of connector only needs to be redefined after a slight change in the connection method, that is, it becomes a new design scheme suitable for another type of connection method; second, the cable can be assembled Install the wire-to-wire connector at its end and the other-end. If the wire-to-board connector avoids the ambiguity of this type of connection, the connection form just provides an effective basis for connector classification. The development of line connectors should be toward miniaturization, high density, high speed transmission, and high frequency. Miniaturization means that the center distance of the connector is smaller, and high density is to achieve a large number of cores. High speed transmission refers to modern computers and information Technology and networking technology require that the time-scale rate of signal transmission reaches the megahertz band and the pulse time reaches sub-milliseconds, so high-speed transmission connectors are required.
Conclusion
Connectors are indispensable components in electronic equipment. Observing along the path of current flow, you will always find that there are one or more connectors. The form and structure of the connector are ever-changing. With the application object, frequency, power.There are different types of connectors for different application environments, etc. But no matter what kind of connector, it is necessary to ensure that the current flows continuously and reliably along the Yang.
English
