What is the use value of a waterproof connector?

The waterproof connector for drones is a plug with waterproof performance and can provide safe and reliable connections for power and signals.

What is the rating of waterproof connector for drones?

What are the components of the waterproof connector for drones?

What is the use value of a waterproof connector?

What is the rating of waterproof connector for drones?

The main rating standard for waterproof connectors is based on the IP waterproof rating standard. To see the waterproof performance of the waterproof connector, it mainly depends on the last two digits of IP, the first X is from 0 to 6, and the highest level is 6; the second digit ranges from 0 to 8; Therefore waterproof The highest water resistance of the connector is IP68. Sealing principle: Put on up to 5 sealing rings and sealing rings to seal with pressure preload. This type of seal does not lose the preload force when the connector thermally expands and contracts, and ensures the waterproof effect for a long time. Water molecules cannot penetrate under normal pressure.

Outdoor waterproof household connectors, 220-V-10-A three-pin three-pole plugs can be used in unprotected state to meet household requirements. (The protection level IP66 can meet the needs of the family. IP66 means that the water will not penetrate if it is vigorously sprayed in all directions, and that it will not penetrate into the water after soaking it in 1-meter deep water for 1-hour.) It should be that outdoor sockets are generally made of PC material and anti-aging should be considered.

Many people do not know that there are already waterproof and rainproof 10-A "fingerprint" outdoor sockets for home use, and use splash-proof indoor boxes instead of waterproof sockets.It is not safe, and the service life is also due to the fact that the UV service life does not exceed one year.

What are the components of the waterproof connector for drones?

The connector for the drone is a waterproof box with a cover attached to the outside of the general wall outlet. The place where the box touches the wall has a rubber pad to make it waterproof; Hole down, matching skewer. There are three-phase four-wire and three-phase five-wire support skewers and skewers.

What is the use value of a waterproof connector?

The waterproof connector breaks people's impression that ordinary sockets are afraid of water and power leaks, thus opening a new era in the era of waterproofing and waterproofing. It uses up to 5-seals and sealing rings to seal with pre-pressure. Such a sealing method can maintain a good preload force when the connector expands and contracts when heated and contracted, and it will not leak if it works for a long time. Under normal circumstances, a lower pressure does not allow water molecules to penetrate, so it can work for a long time at depths below 2m.

The main products of Shenzhen Hongru Connector Co., Ltd. includes IDC puncture plug, cable-to-cable and cable-to-board connectors and nylon insulated terminals used in LCD displays, household appliances, electronic controls for power supplies, treadmills and ATX power supplies, communications, automobiles, light field etc.