IDC RAST 2.5mm Connector With Side Wall HRB M7239R & M7239

Describe:

RAST 2.5 connector for direct mating, Insulation Displacement Technology (IDT), locks to the PCB via locking toe, available with or without keying ribs, for single conductors, with side wall.

Contact distance 2.5mm
TUV-17022499001
GWT: 750˚CIEC-60335-1
UL-E304945
CUL-E304945

Parameter:

1).Rated current: 3A AC, DC

2).Rated voltage: 32V AC, DC
3).Operating temperature: -40˚C -   +120˚C
4).Contact resistance: maximum 10mΩ
5).Insulation resistance: minimum 1000MΩ.
6).Withstand voltage: 1400V AC/minute
7).Material: Shell: Nylon 66 UL94V-0
                             Terminals: Phosphor bronze, tin plated
9).Wire range: AWG 24 to 22 GWT: 750˚CIEC-60335-1

Material number information:

M7239R-X-XX-X-X(X) -VX

         ①   ②  ③ ④⑤ ⑥ ⑦

①: HRB product series number

②: R: 90°(To assemble at the end of the wire)

      Blank: 180°(To assemble in the middle of the wire)

③: Circuit number(2-20)

④: Left side code: A: Without side wall

                              B: Side wall 0.6mm

⑤: Right side code: A: Without side wall

                                B: Side wall 0.6mm

⑥: Solid rib:

        0: Without solid rib.

        1: Solid rib between pole 1 and pole 2.

        2: Solid rib between pole 2 and pole 3.

             and so on.

⑦: Plated number:

      Blank: Tin plated.

      00H: Selective gold plated 1u''

      02H: Selective gold plated 2u''  

      03H: Selective gold plated 3u''

⑧: Wire size number:

      2: AWG#22     4: AWG#24

⑨: Without terminal number.

Packing information:

IDC advantages:

1).While crimping the IDC, immediately punch holes to remove the oxide on the surface of the wires and terminals to make good contact between the conductors.

2).Simplify wiring harness design
    Reduce incorrect assembly

We can choose single color in IDC's mass production to reduce inventory and purchase various colors for wires to facilitate material management.Process or crimp the first time and crimp the complete harness the second time.Each line is given corresponding to the electrical signal error caused by avoiding confusing holes.

3).Up to now, using IDC, pre-assembled factory-direct finished wire harness components have been optimized, as well as various foolproof hook designs to minimize the reliance on skilled workers to assemble finished products, which can be assembled according to the product structure and reduce costs.

4).We have taken into account the subsequent widespread use around the world, that is, all metal parts are embedded in plastic casings to avoid extrusion during local and international transportation, causing damage and destruction of IDC connectors, and reduce transportation losses.

  IDC Rast product applications: