Many people may not know what the wafer connector does, but it actually has applications in many areas. What are the special USES of the wafer connector? Why use the wafer connector?
Wafer connector application
What are the advantages of the wafer connector?
Why use the wafer connector?
What are the characteristics of the wafer connector?
Wafer connector application
The wafer connector is a component frequently touched by electrical engineers. Its function is very simple, between the circuit is to block or isolate the circuit communication bridge, so that the current flow, so that the circuit can achieve the intended function. connectors are an important part of electronic devices. If you follow the current path, you will always find one or more connectors. Clamping connectors belong to clamping connectors, plugs and sockets. An electrical connector is a device that connects two active devices to transmit current or signals. It is widely used in aerospace, national defense and other military systems.
What are the advantages of the wafer connector?
1.Improve production process: simplify the assembly process of electronic products. It also simplifies the mass production process
2. Easy maintenance: if an electronic component fails, it can be replaced quickly when the connector is installed
3. Easy to upgrade: as technology advances, you can update the meta parts when the connectors are installed, replacing the old ones with new, more complete ones
4. Increased design flexibility: greater flexibility in use.
Why use the wafer connector?
You can assume what would happen if there were no wafer connector? The circuit must be permanently connected to a continuous conductor. For example, to connect an electronic device to a power supply, the ends of the cable must be solidly connected to the device and power supply by means of welding, for example. Therefore, whether it is produced or used, it brings a lot of inconvenience. To replace the car battery, assuming the battery cable is fixed and welded to the battery, the car manufacturer increases the workload, production time and battery installation costs. When the battery is damaged and needs to be replaced, the vehicle should be sent to the repair station. The old should be dismantled and welded to the new. Therefore, more labor costs should be paid. With connectors, you can save a lot of trouble. Buy a new battery from the store. Disconnect the connector. This simple example illustrates the benefits of connectors. Design and production process more convenient and flexible, reduce production and maintenance costs.
What are the characteristics of the wafer connector?
1. A wafer connector is very similar to a connector. The biggest difference is that these connectors are better suited as actual connectors rather than places to connect certain wires. Here's the special difference and similarity: these connectors are polarized, which means you can't insert a paired connector in the wrong way.
2. The male connector is connected to the PCB and the female connector is connected to the cable. The female connector is compressed, so no welding is required (although welding is optional).
3. The pin spacing is the same as the plug, so they are compatible with each other.
4. The shell is usually made of only plastic parts (some of which have metal parts) and is assembled with wires and terminal wafers.
If you are looking for a wafer connector manufacturer that can provide you with high-quality products at a reasonable price, Shenzhen Hongru Connector Co., Ltd is a wise choice.
English
