How to assemble rast connectors?

Rast connectors are widely used in life. It plays a great role as a bridge to connect the current flow in our daily life. We have an easier and happier life with it. Therefore, how to install a rast connector correctly is a prerequisite for making good use of rast connectors'value. It is also of great importance that before installation, we must understand some of the characteristics of the rast connector in order to install it correctly.

Different rast connectors'forms and structures are different. There are various types of connectors with different application objects, frequencies, power, and application environments. For example, the connectors for lighting on the court, the connectors for hard drives, and the connectors for lighting rockets are quite different. But no matter what kind of connector it is, it is necessary to ensure that the current flows smoothly, continuously and reliably.

Below are some relative points about rast connector:

Polarity and contact of rast connector

Ways to assemble rast connector

(1) Polarity and contact of rast connector

Most rast connectors can only be connected in one direction. This feature is called polarity, and those rast connectors that have some means to prevent them from connecting incorrectly are called polarized.

Contact is an important part of the rast connector. They are metal parts that are in contact with each other, forming an electrical connection. This is also where problems are prone. The contacts are easy to become dirty or oxidized, or the elastic force that presses the contacts together may fade away over time.

(2) The way to assemble rast connector

Install the rast connector's body to the lower fixing module of rast connector of assembly equipment, install the compression spring on the sliding part and then assemble it to the hinge part together, and install the hinge part with the sliding part to the upper fixing of the connector assembly equipment. On the module, push the fixing rod of the connector assembly device to fix the torsion spring to the rast connector body, and finally press the upper fixing module to make the hinged part assembled on the connector body and insert the pin to fix it. Finally, it can get the result to enable the current to flow smoothly, continuously and reliably.

We provide different kinds of connectors like rast 2.5 connectors, rast 2.5 power connectors, rast 5.0 connectors, circular connectors, wire to wire connector wire to board connector, LED lighting connector and automobile connector, etc. In fact, 16 years of rich manufacturing experience in making different rast connectors enable us to have an impact on connectors. we have our own design and development solutions: We have our own elite R&D team, which can help to make your ideal electronic connectors come true. At the same time, we have exported our products worldwide and its export distribution is wide. We can also provide the best service. Hope this article has helped you understand more about rast connectors. If you need any rast connectors, please contact us.