HRB 3.0mm Waterproof Connector with Panel Type

Most waterproof connectors are large in size, difficult to handle in a production environment and expensive. Meeting customer needs for a small form factor waterproof connector that is easy to handle and cost effective long been a challenge.

HRB wire to wire waterproof electrical connector meets the need for a small form factor waterproof connector. It has an IP67 waterproof rating per IEC 60529. It is on a 3.0mm pitch(contact to contact)

Wire to wire waterproof connector:

Wire to wire waterproof connector is available in 2, 3, 4, 5, 6, 8, 10 and 12 positions. These waterproof connectors deliver a cost effective solution by utilizing a brass tin plated tab contact and a copper alloy tin plated receptacle contact. The contact system has a 3 amp rating and 18-22 AWG wires.

Feature:

Waterproof performance

Contained seal ring

Solid rubber seal

Double-spring construction

Housing-to-terminal locks

Inner-housing lock

Wire range: AWG#18 to 22  Ø1.7- Ø 2.5mm Insulation O.D.

Application:

Electric vehicle

Electric motorcycle

Automobile camera built-in waterproof

Automotive battery built-in waterproof

Outdoor waterproofing applications

• product information

• Name: 3.0mm pitch waterproof plastic shell

• Brand: HRB

• Model: M30032WP  

• Color: milky white

• Material: PBT UL94V-0

• Rated current: 10A AC, DC max

• Rated voltage: 250V AC, DC

• Withstand voltage: 1500V AC/minute

• Contact resistance: 10mΩ Max

• Insulation resistance: 1000MΩ Min

• Temperature range: -40°c~+130°c

• Product features: The product spacing is 3.0mm in a single row, with 2/3 PIN. The appearance is milky white, and it is easy to match wire-to-wire.Perfectly plugged in, not easy to fall off, and easy to disassemble, it can reach IP67 waterproof rating, giving it a full range of experience design effects.This product has obtained UL certification and SGS environmental certificate!