Most waterproof connectors are large in size, difficult to handle in a production environment and expensive. Meeting customer needs for a small form factor waterproof connector that is easy to handle and cost effective long been a challenge.
HRB wire to wire waterproof electrical connector meets the need for a small form factor waterproof connector. It has an IP67 waterproof rating per IEC 60529. It is on a 3.0mm pitch(contact to contact)
Wire to wire waterproof connector:
Wire to wire waterproof connector is available in 2, 3, 4, 5, 6, 8, 10 and 12 positions. These waterproof connectors deliver a cost effective solution by utilizing a brass tin plated tab contact and a copper alloy tin plated receptacle contact. The contact system has a 3 amp rating and 18-22 AWG wires.
Feature:
Waterproof performance
Contained seal ring
Solid rubber seal
Double-spring construction
Housing-to-terminal locks
Inner-housing lock
Wire range: AWG#18 to 22 Ø1.7- Ø 2.5mm Insulation O.D.
Application:
Electric vehicle
Electric motorcycle
Automobile camera built-in waterproof
Automotive battery built-in waterproof
Outdoor waterproofing applications
1) Current Rating: 3A AC, DC max.
2) Voltage Rating: 100V AC, DC
3) Temperature range: -55 ºC to +85 ºC
4) Contact resistance: 10mΩ Max
5) Insulation Resistance:1000MΩ Min
6) Withstanding Voltage:1000V AC/minute
8) Waterproof grade: IPX7 of IEC 60529
9) Terminal Applicability: AWG#26-22(Insulation O.D.1.4-1.7mm)
10) Material: Phosphor Bronze
11) Finish: Tin plated(Ni 30-50U'' Sn 80-12U'')
12) Thickness: 0.25mm