2.0mm Pitch Waterproof Connector

The 2.0mm pitch waterproof connector has two version, standard type and E-unlock (easily mating) type. and both version is available in 2,3,4,6 and 8 positions. These waterproof connectors deliver a cost effective solution by utilizing a brass tin plated tab contact and a copper alloy tin plated receptacle contact. The contact system has a 3 amp rating and handles 26-22 AWG wires.

Advantage：
Most waterproof connectors are large in size, difficult to handle in a production environment and expensive.
Meeting customer needs for a small form factor waterproof connector that is easy to handle and cost effective has long been a challenge. These 2.0mm pitch waterproof connector meets the need for a small form factor waterproof connector.
This series connector has an IP67 waterproof rating per IEC 60529.

Keywords

What Is A 2.0mm Pitch Waterproof Connector？

1. Waterproof connector series offered in both a wire to wire and wire to board configuration.
2. Available in 2,3,4,6 and 8 position.
3. Connector comes with all seals pre-assembled eliminating the need for additional handling on the manufacturing floor.
4. Contact locking feature is internal to housing thereby eliminating contact back out.
5. The waterproof connector series offer a flexible, manufacturing friendly and cost effective solution to those customers looking for a reliable small factor solution for a waterproof IP67 rated product.

Product Feature

1.Waterproof, moisture-proof.
2.Anti-vibration, anti-ultraviolet
3.Duration, fool-proof.

Quality Assurance

1.IATF16949

2.ISO9001
3.Comply with LV214

4. UL certificated

Waterproof Connector

Types Of 2.0mm Pitch Waterproof Connectors

Standard type waterproof connector

Product Description

Current rating: 3 A AC, DC (AWG #22)
Voltage rating: 100 V AC, DC
Temperature range: -40°C to +120°C
(including temperature rise in applying electrical current)

Contact resistance: Initial value/ 10 mΩ max.
After environmental tests/ 15 mΩ max.
Insulation resistance: 1,000 MΩ min.
Withstanding voltage: 1,000 VAC/minute
Applicable wire: AWG #26 to #22 0.13 to 0.33 mm2
Insulation O.D./ 1.4 to 1.7 mm
Waterproof grade: IPX7 of IEC 60529 (Mated connectors are immersed in
1m depth water for 30 minutes, no water infiltration leads to short circuit )
Comply with LV214
Circuit Number: 1x2,1x 3, 1x4, 2x3, 2x4

Features

Waterproof, moisture-proof, anti-vibration, antiultraviolet, duration, fool-proof.

E-unlock waterproof connector

Product Description

Current rating: 3 A AC, DC (AWG #22)

Voltage rating: 100 V AC, DC

Temperature range: -40°C to +120°C

(including temperature rise in applying electrical current)

Contact resistance: Initial value/ 10 mΩ max.

After environmental tests/ 15 mΩ max.

Insulation resistance: 1,000 MΩ min.

Withstanding voltage: 1,000 VAC/minute

Applicable wire: AWG #26 to #22 0.13 to 0.33 mm2

Insulation O.D./ 1.4 to 1.7 mm

Waterproof grade: IPX7 of IEC 60529 (Mated connectors are immersed in

1m depth water for 30 minutes, no water infiltration leads to short circuit )

Comply with LV214

Circuit Number: 1x2,1x 3, 1x4, 2x3, 2x4

Features

1.Easy to insert and extract.
2.Waterproof, moisture-proof, anti-vibration, antiultraviolet, duration, fool-proof.

2.0mm Pitch Waterproof Connector Solutions

These waterproof connectors widely used in a variety of fields ,application include but are not limited to the following:

Outdoor Electrical Equipment
Outdoor Lighting System
Scenic Audio Systems
Drones
Mine Lighting System
Communication System
Auto Automatic Awn Mowers
Solar Equipment
Automatic Doors And Windows
Refrigerated Warehouses
Cold Chain Vehicles
Yachts
Motor Bike
Electric Bike
Car Radar

Purpose: Signal and power transmission in outdoor rain and humid environment.