HRB 2.0mm Waterproof Connector IP67 PCB Header Connector

Most waterproof connectors are large, difficult to handle in a production environment, and expensive.Meeting customer demand for small, waterproof connectors that are easy to operate and cost-effective has long been a challenge.

Wire-to-board waterproof electrical connectors meet the needs of small waterproof connectors.It complies with IP67 waterproof rating according to IEC 60529.It uses 2.0mm pitch (contact contact) and 4.0mm row spacing for double row versions.Overall dimensions when wired are only 30.2mm, wire-to-wire series is 21.0m for the PCB version.

Wire-to-board waterproof connector:

Wire-to-board waterproof connectors are available in 2, 3 and 4 positions, providing a similar cost-effective solution through the use of phosphor bronze tinned socket contacts.Like the wire-to-wire version, the wire-to-board contact system has a 3-amp rating and handles 24-22AWG wire.The shrouded headers feature copper alloy tinned contacts, are available with vertical or top entry, are styled and designed for general use as well as with resignation coated ('encapsulated') PC boards.The plug is also designed to accept wires through this connector socket for maximum flexibility.

Feature:

Waterproof performance

Contains sealing ring

Strong rubber seal

Double spring structure

Shell to terminal lock

Inner case lock

Wire range: AWG #22-26

Application:

drone

electric car

Electric Motorcycle

Car camera built-in waterproof

Car battery has built-in waterproof function

Outdoor waterproofing applications

1) Rated current: 3A AC, DC max.

2) Rated voltage: 100V AC, DC

3) Temperature range: -55ºC to +85ºC

4) Contact resistance: maximum 10mΩ

5) Insulation resistance: 1000MΩMin

6) Withstand voltage: 1000V AC/minute

8) Waterproof level: IPX7 according to IEC 60529

9) Terminal applicability: AWG#26-22 (insulation OD1.4-1.7mm)

10) Material: phosphor bronze

11) Surface treatment: tin plating (Ni 30-50U''Sn 80-12U'')

12) Thickness: 0.25mm