content is empty!
M30032WP-NXN-X-X
① ② ③ ④ ⑤
①M30032WP: HRB series, Plug
②1: single row; 2: dual row
③N: Number of Pins per row 2/3/4/5/6pin
④Housing color: B: Black, W: White, G: Gray
⑤Seal Plug Color:
-GN: Green (Wire insulation OD 1.5-2.1mm)
Blank: Blue (Wire insulation OD 1.6- 2.4mm)
M30033WP-NXN-X-P-X
① ② ③ ④ ⑤⑥
①M30033WP: HRB series, Receptacle
②1: single row; 2: dual row
③N: Number of Pins per row 2/3/4/5/6pin
④Housing color: B: Black, W: White, G: Gray
⑤P: With panel mount
⑥Seal Plug Color:
-GN: Green (Wire insulation OD 1.5-2.1mm)
Blank: Blue (Wire insulation OD 1.6- 2.4mm)
IP67 waterproof rating (IEC 60529), integrated silicone sealing for harsh‑environment use
Panel‑mount design with mounting lugs for secure wire‑to‑wire connection
TPA secondary lock prevents terminal back‑out against vibration and shock
PBT UL94 V‑0 housing & tin‑plated phosphor bronze contacts, ‑40℃ ~ +105℃ operating range
10A / 250V rating, low contact resistance for stable power & signal transmission
Multiple pin options, fits AWG 18‑22 wires, RoHS & REACH compliant
Waterproof plugs, retaining clips, sealing rings, terminals and male‑female housings work together to deliver reliable wire‑end mating, sealing protection and stable assembly.
Outdoor Equipment
Reliable IP-rated waterproof connectors withstand outdoor humidity, dust and temperature fluctuations, delivering stable power & signal transmission for lawn mowers and outdoor gardening machinery.
Electric Motors
Robust structure and anti-vibration locking design guarantee long-term steady connection for industrial motors, effectively avoiding terminal loosening under continuous operation vibration.
Agricultural Drones
Compact layout + dustproof & waterproof performance adapts to farm complex working conditions, supporting safe power supply and signal control for plant protection drones during field spraying operations.
Outdoor Spotlights
Integrated sealing structure prevents rainwater & dust ingress, ensuring durable connection performance for landscape spotlights under long-term outdoor exposure.
Automotive Door Locks
Stable low-resistance contacts & anti-shock structure match automotive-grade requirements, realizing precise signal transmission for vehicle door lock control systems.
Smart Wheelchairs
Safe current carrying capacity and reliable locking structure support stable power output and control signal transmission, securing daily safe operation of mobility assist devices.
Q: What is the recommended wire strip length?
A: Reference value for wire strip length is 3.00±0.20mm.
The wire strip length depends on wire type and crimping method, and actual processing conditions shall be used to confirm the optimal strip length.
Do not nick or cut wire conductors during wire‑stripping operation.
Q: How to insert crimped terminal into housing correctly?
A: Before inserting the crimped terminal, align the orientation of housing and terminal for proper mating.
When the lock opening of the housing faces upward, the barrel‑seam side of the crimped terminal shall also face upward.
Do not rotate the terminal during or after insertion. Rotation may cause damage to rubber seals and housing.
Note: For terminal insertion: keep the smooth surface upward, anti‑key feature downward, and terminal barrel seam upward. Incorrect orientation will cause housing damage.
Q：What is the wiring recommendation for harness exiting from the connector?
A：Avoid sharp 90‑degree bends immediately at the connector wire exit. Sharp right‑angle bending will shorten harness service life and may lead to functional failures. Gradual, gentle cable bending is recommended during routing design.
Q：What should be noted during finished‑product inspection of harness assemblies?
A：
1. Use precision fixtures during wire inspection and electrical continuity testing to avoid prying the connector.
2. Perform continuity tests using the mating counterpart connector (e.g. receptacle for tab contact). Do not use non‑matching test
pins. Replace test mating connectors periodically.
3. Replace any deformed or damaged connectors, contacts, sealing rings or wire seals with new parts directly, regardless of damage
severity. Do not attempt repairs.
4. Verify wire seals are properly seated inside the housing.
5. Do not perform air‑blow testing, as this may dislodge sealing components.
Q：What are the storage and transportation precautions for connectors and harnesses?
A：
1. Store housings and crimped contacts under conditions: temperature 25 °C ± 5 °C, relative humidity ≤70% RH. Keep away from
direct sunlight, moisture and dust. Sealing rings and wire seals are rubber‑based components. UV exposure will cause rubber aging,
and dust contamination will degrade waterproof performance.
2. Handle stacked housings and wire harnesses with extra care during storage and transportation.
Q：How to mount the female connector onto the panel?
A：
1. Place the female connector into the panel cut‑out.
2. Fasten using M4 bolts passing through the panel and mating with nuts (follow the direction shown by arrows).
<Note: This mounting specification applies mainly to panels with 10 mm thickness.>