M5005 indirect.pdf

RAST 5 connector for indirect mating, insulation displacement technology (IDT), with interior locking, consecutive placement without loss of pitch

IDC advantages:

1). While crimping the IDC, pierced instantly, removing the oxide on the surface of wires and terminals, so as to make the good contact between conductors.

2). Simplify harness design
    Reduce errors assembly

    We can choose single color in mass production of IDC, so that reduce inventory and purchase a varity of colors for the wires to facilitate materials management. Processing or 1st crimp, 2nd crimp complete harness. Each line corresponds to avoid confusion holes generated electrical signal error given.

3). UP till now using IDC, has been optimized to pre-installed factory direct finished harness assembly, and various foolproof hooks designed to minimize reliance by skilled workers assemble the finished product, according to the product structure can be assembled finished products and reduce costs.

4). We have taken into account the subsequent global widely used, that is, all metal parts have been embedded in plastic housing, to avoid collisions in the local and international transportation squeeze, causing damage and destruction IDC connector, reducing transport losses.

IDC Rast products application:

                                                                                                  

1). Current rating: AWG 20# 7A AC, DC AWG 18# 10A AC, DC
2). Voltage rating: 250V AC, DC
3). Operating Temperature: -40˚C--+120˚C
4). Contact Resistance: 10mΩ max.
5). Insulation resistance: 1000MΩ min.
6). Withstanding voltage: 2800V AC/minute
7). Material: Housing:Nylon66 UL94V-0
                  Terminal: Phosphor bronze, Tin-plated silver-plated or selective gold-plated
8). Wire range: AWG 20 to 18
9). Insulation diameter: 2.5mm Max.
10). GWT:750˚C IEC-60335-1