A-M4084F-2xN-W-P
① ② ③ ④ ⑤ ⑥
①A: Automotive regulation certification
②M4084F: HRB series, female housing
③2: Dual-row
④N: Number of pins per row, 3/4/5-pin
⑤W: Housing color, W: White
⑥P: Panel mount
A-M4084M-2xN-W
① ② ③④ ⑤
①A: Automotive regulation certification
②M4084M: HRB series, male housing
③2: Dual-row
④N: Number of pins per row, 3/4/5-pin
⑤W: Housing color, W: White
A-T4084MPS-X-X
① ②③
①T4084MPS: HRB series, male terminal
②X: Wire Gauge options: AWG16-24
A-T4084FPS-X-X
① ②③
①T4084FPS: HRB series, female terminal
②X: Wire Gauge options: AWG16-24
Wire gauge range: 16–24 AWG (1.5–0.22 mm² cross-sectional area)
Available cavity layouts: single row: 2/3/4/5 and dual-row: 6/8/10 positions
Connector System :Wire-to-wire
IP67 Waterproof & Dustproof: Full dual protection from dust and water; shields against moisture, rain and temporary immersion.
Built-in mounting flanges with screw holes, securely fixed on cabinet panels/bulkheads to withstand wire pulling and vibration, protecting internal terminals from loose contact.
Wall-through design acts as stable external power interface for inverters, energy storage cabinets and industrial control devices, achieving consistent IP67 sealing after panel installation.
The waterproof seal, terminals, housing, and single-wire waterproof plug are designed in coordination to ensure installation efficiencyandsealingreliability
1. New Energy EV / Two-Wheelers / Lithium Energy Storage
For BMS power supplies, PACK interconnections, on-board chargers, PTC heaters and DC cooling fans inside battery packs.
Performance specs: 10–15A rated current, IPX7 waterproof rating, operating temperature range -40℃ to +125℃, anti-vibration structure and anti-mismating key design.
2. High-Power Outdoor LED Lighting / Landscape Lights / Grow Lights
Suitable for wall washers, flood lights, high-mast lamps and modular power supplies.
The 15A current rating supports loads of 300–500W. The compact 4.0mm pitch design fits neatly inside lamp housings.
3. Power Tools / Garden Machinery / Outdoor Robots
Ideal for motor and battery connections on lawn mowers, leaf blowers, chainsaws, electric wheelchairs and cleaning robots.
Mandatory features: IPX7 waterproof, 15A current capacity, secure locking latching system, with outstanding resistance to drops, dust and water exposure.
4. Industrial Controls / Low-Voltage Inverters / Servo Drives
Applied to power supply ports of compact PLC I/O modules, sensor bus lines, valve islands and external power interfaces for servo drivers.
Panel-mount versions serve as wall-through power ports for equipment, while wire-to-wire variants are for field wiring installation.
5. Photovoltaics / Energy Storage / Inverter Systems
Used for low-voltage DC circuits of PV strings, combiner boxes and residential energy storage units.
Equipped with IPX7 sealing, 15A carrying capacity and reverse polarity prevention, meeting long-term service requirements for outdoor installations.
6. Smart Home Appliances / White Goods
For high-power component connections on heat pumps, clothes dryers, dishwashers and water heaters.
Resist steam, water leakage and oil contamination. IPX7 waterproof & 15A rated current have become standard configurations for mid-to-high-end home appliances.
A1: Two terminal options are available. Standard copper terminals support up to 15A AC/DC; high-conductivity copper terminals reach 20A AC/DC, with a rated voltage of 600V AC/DC for power transmission.
Q2: What wire gauge and wire insulation diameter does this connector fit?
Q: What is the difference between panel-mount and non-panel-mount wire-to-wire connectors, and how do I choose the right type for my project?
A: Core Differences as below 3 points:
Installation Method & Structure
Panel-mount connectors come with integrated mounting flanges and screw holes, designed to be fixed firmly onto equipment cabinet walls, control box panels or bulkheads. Non-panel-mount (free-hanging) versions have no mounting lugs; they only rely on wire harness tension to stay in place after mating, with no ability to attach to equipment housings.
Mechanical Stability & Load Resistance
Panel-mount models bear pulling force from wiring via the panel instead of internal terminals, effectively avoiding terminal loosening or pin deflection caused by frequent wire tugging. Free-hanging connectors transfer all wire pull stress directly to contact terminals, making them unsuitable for scenarios with frequent wiring movement.
Application Scenarios
Panel-mount variants serve as fixed wall-through power interfaces for industrial PLCs, servo drivers, energy storage cabinets and charging equipment. Non-panel-mount connectors are used for floating wiring inside equipment, such as internal vehicle harnesses, lamp internal circuits and power tool battery connections.
Selection Guide
Choose panel-mount connectors if you need a fixed power port penetrating equipment casing, and the wiring will face regular pulling, vibration or external force.
Choose standard non-panel-mount wire-to-wire connectors for internal floating wiring with no need to fix the connector to cabinet panels, where wires only bear minor static tension.